Part Car stereo Operation: Complete car stereo removal for repair Using the four special tools that are inserted into the slots above and below the radio to release the retaining
Step2 – Remove axle nut. Central to the wheel bearing, axle and wheel rotor is the axle nut. It will need to be removed to access the old bearing for replacement. Using a socket on the breaker bar, turn the nut counterclockwise. Figure 2. Remove axle nut with 12mm Allen socket and breaker bar. Pro Tip.
okaythen. Go to halfords and buy both parts of an Iso shell, including pins, and an A4 autoleads adapter (beware, if its a really early a4, you may need an audi 80 autoleads adapter) Replace the iso on the audi loom as it was cut. re-wire the alpine iso as per the manual:
Attention You no longer need to send your ECU in to JHMotorsports for ECU Tuning. If you are interested in having your car tuned with JHM Software please

Thisarticle applies to the Audi A4 B7 (2004-2008). There are just some secrets that have to be revealed. And there are no greater secrets that you should know than what everyday driving enthusiasts are saying that make the B7 Audi A4 such a highly rated and industry respected vehicle. Audi A6 C5 and A6 C6 Removing Headliner

Ironically unplugging the seat and removing it makes the rest of the job must easier - extra 5 minutes of unplugging the battery and the seat, and then plugging everything back in will save you like 45 minutes of struggling with the module case. 04-05-2017 01:58 PM #6. Daaron.

4mqX2rS. 227 5 414 273 377 457 94 449 387

audi a4 b7 radio removal